Hp 8559A spectrum analyzer &182T oscilloscope system

What is for sale: Hp 8559A spectrum analyzer &182T oscilloscope system

---

HP 182T Oscilloscope Display Mainframe
This System Works! See Pictures.
THIS IS FOR PICK-UP ONLY! Not for sale outside the USA.
Can Pick up between Huntington Beach and San Diego California.
Everything working correctly and in Very Good Condition!. This is a Great Deal! Comes complete with Operation and Service Manual for both the Spectrum Analyzer and the Oscilloscope. Both Manuals are in Excellent Condition.
HP 8559A Spectrum Analyzer Specifications
RANGE: 10 MHz to 21 GHz, covered in six pushbutton selectable ranges, SPANS: Full Span, Per Division (MHz/Div, KHz/Div), Zero Span. TUNING ACCURACY: 0.01-3.0 GHz: + (1MHz + 0.3% of center frequency) 3.0-21.0 GHz + (5MHz + 0.2% of center frequency)
Resolution Bandwidths: Eight selectable resolution (3-dB) bandwidths in 1-3 sequence from 1 kHz to 3MHz. Bandwidth may be selected independently or coupled with frequency span. Optimum ration of frequency span to resolution bandwidth is indicated by alignment of markers (x) on the two controls.
Range: -111dBm to +30 dBm, Maximum Input: +20 dBm with 0 dB input attenuation, +30 dBm with > 10 dB input attenuation, Calibrator Output: -10 dBm + 0.3 dB (into 50 Ohms), 35 MHz + 400 kHz, Reference Level: 10-dB steps and a 12-dB vernier for calibrated Reference Level adjustment from - 112 dBm to + 60 dBm, Input Attenuator: 0 dB to 70 dB selectable in 10 dB steps
Automatic: Adjusted automatically to maintain absolute amplitude calibration for any combination of frequency span, resolution bandwidth, and video filter bandwidth. Calibrated Sweep: 20 selectable sweep times in 1-2-5 sequence. May be swept manually, in either direction, with front panel control.
HP Model 182T Display with HP Model 8559A Spectrum Analyzer: 115 or 230 Vac + 10%, 48-440 Hz. Power consumption less than 200 Volt-amperes with plug-in installed, convection cooled.
The Model 182T is a solid-state, lightweight laboratory and general-purpse oscilloscope mainframe with plug-in capabilities. It is designed to display complex high-frequency waveforms and to measure alternatin and direct-current voltages.
In the HP 180T-series mainframe, the rear-panel auxiliary output connectors (AUX A, AUX B, AUX C, AND AUX D) provide, respectively, Vertical Output, Pen Lift Output, 21.4 MHz IF Output, and Horizontal Output.
PICK-UP ONLY BETWEEN HUNTINGTON BEACH AND SAN DIEGO CALIFORNIA.