Hp 35665A 1D0 1D1 1D2 1D4 ana dynamic fft analyzer good

What is for sale: Hp 35665A 1D0 1D1 1D2 1D4 ana dynamic fft analyzer good

---

Your Source for Quality Reconditioned Test Equipment. We are the best VALUE in test and measurement!
HP 35665A 1D0, 1D1, 1D2, 1D4, ANA Dynamic Signal FFT Analyzer
2 channel, 102.4 kHz, 4mV to 31.7V Input Range
Check out our other great test equipment
Description: The HP 35665A is a flexible FFT-based analyzer that provides time, spectrum, network, and amplitude domain measurements with a broad range of options. The swept-sine mode offers higher dynamic range than broadband techniques and increases dynamic range up to 120 dB.
244 uHz to 102.4 kHz single channel frequency range, 122 uHz to 51.2 kHz two channel range
Up to 800 lines resolution
1 Mohm input impedance, 4mV to 31.7 V Peak input level range
0.04 dB and 0.5 degree channel matching
Built-in source with sine, random, chirp, swept-sine, and arbitrary waveforms
Option 1D0 - Computed Order Tracking
Option 1D1 - Real-time Octave and 1/3rd Octave Measurements
Option 1D2 - Swept Sine Measurements
Option 1D4 - Arbitrary Waveform Source
Option ANA - 8 Mbytes Memory
Condition: Will be Reconditioned and Performance Tested to meet manufacturers specifications. Clean unit inside and out. Physically inspected, hardware re-torqued, connectors treated with a preservative, controls and switches lubricated as appropriate, power supply electrolytics tested. Burned in for 72 hours and then performance tested. All knobs and switches are in good condition. There sre some scratches in the plastic covering the CRT.
What do our grades mean? Click Here
Manual: Operation & Programming PDF
Need Your Unit Repaired/Reconditioned
Please contact us prior to purchasing an item if you have a question. We're glad to assist in any way we can.
Calibration is not guaranteed unless the item is advertised as calibrated or you purchase calibration at the time of sale. We maintain a laboratory with high quality equipment in order to verify the performance of the items we sell. We can provide ANSI Z540.1 calibration services on most items sold, if desired. Please contact us for Repair, Reconditioning, or Calibration services.
* Item may have some cosmetic imperfections such as scratches, dents, cracks, sticker residue, and discoloration due to normal wear and tear. Every effort is made to make our items as cosmetically acceptable as possible. Abnormal cosmetic conditions are mentioned in the item condition.