Idk turbo nozzle for pressure washer

What is for sale: Idk turbo nozzle for pressure washer

---

Available in the following orifice sizes: 3.5, 4.0, 4.5, 5.5, 7.0, 8.0, 9.0, 10.0. 1/4 plug included. Please specify size when ordering.
-The Impact of a 0° Nozzle with a 25° Fan!
-The large Dirt Killer is the world's most powerful cleaning nozzle.
-It features a high speed spinning head, and produces large water droplets which deliver a devastating blasting force.
-It has the ability to make difficult cleaning projects
Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemical, water, time, and money. The Dirt Killer generates a whirl wind of water droplets so powerful the imbedded dirt is blown away. Dirt Killer nozzles, which feature a rotating turbine, deliver the punch of a zero degree nozzle with a 25 degree fan, creating 10 times the cleaning impact of a standard flat tip nozzle. Industrial Dirt Killer is the world's most powerful cleaning nozzle. It also features a spinning head, which moves at a much slower speed to produce large water droplets that deliver a devastating blasting force. The IDK has the ability to attack and thoroughly clean 3-dimensional surfaces such as concrete and steel. Difficult cleaning projects, such as crab pots, hog confinements, farrowing crates, milk barns, and many others, are made easy with this incredible tool. Any Questions please contact us @ (***)-649-5036.
By using properly, the Dirt Killer will perform as follows:
at 3000 PSI approximately 250 to 400 hours: at 2000 PSI approximately 300 to 500 hours: at 1000 PSI approximately 400 to 700 hours before rebuilding or replacing. If the nozzle size required is not available, use the next size larger, i.e. if your machine normally takes a 4.0 nozzle use a 4.5 Dirt Killer. SERVICE ADVISORY: Using a high pressure filter increases the life of the IDK nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. Do not touch rotating water pattern. ALWAYS START WITH THE NOZZLE POINTING TOWARDS THE GROUND.
Works best with pressure regulated unloader. Flow actuated unloaders reduce Dirt Killer Life. Nozzles are color coded Maximum Pressure: 4700 PSI Maximum Temperature: 180 Degrees F. Inlet Thread: 1/4" FPT