Juki du-1181 lockstitch walking foot big bobbin DU1181

What is for sale: Juki du-1181 lockstitch walking foot big bobbin DU1181

---

Juki DU-1181 Lockstitch Walking Foot Big Bobbin DU1181
FREE ! DPx17 or System 135x17 (1 box of 100 needles) FREE ! DPx17 or System 135x17 (1 box of 100 needles)
This is a brand new, in the sealed boxes and has NEVER been used before.
Juki DU-1181 Walking Foot, Top & Bottom-Feed, No Needle Feed, Ind Lockstitch Mach DU1181, Big Bobbin, Large Hook, Power Stand with Electronic DC Servo Motor 1/2 H.P, Made in Japan.
With its powerful top and bottom feed mechanism, the machine smoothly feeds a difficult-to-feed material or a multi-layered part of material without pitch errors, achieving consistent seam quality. The Juki DU1181 is an upholstery lover's dream.
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9 mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double-capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work ith increased efficiency.
The double-capacity hook is provided as standard
The machine comes with a horizontal-axis double-capacity hook, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil amount in the face plate and hook is adjustable.
The machine achieves low-vibration and low-noise
The machine head is designed to achieve optimum balance, thereby reeducing vibration and noise. The machine affords the operator a comfortable working environment.
* The stitch pitch can be adjusted in both the normal and reverse directions.
* The height and inclination of the feed dog can be adjusted.
* The amount of the alternating vertical movement of the wlaking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material.
It comes complete with sewing machine table and Electronic DC Servo Motor 1/2 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM (Model SMS-400), everything (drawer, belt, tools and instruction manual) brand new, packed in three factory sealed boxes and never been used before.Professional assembly required.Six month factory warranty. The SMS400 consumes about 63% less energy and is 1/3 lighter than the average clutch motor. It does not generate any appreciable heat and has only 3 main moving parts, two ball bearings and the rotor.
The SMS400 acts just like a clutch motor but the difference is that you don't hear it running. It only runs when engaged and the maximum sewing speed can be adjusted to the speed you desire no matter how hard you depress your foot the treadle.
If you are tired of the constant hum of a clutch motor or need to replace a worn out motor, the Servo Motor is the answer! The SMS-400 is a 1/2 hp, 110 Volt or 220 Volt, Single Phase motor with super quiet operation and controllability.
All merchandise should be examined upon receipt, no exchanges after 30 days of purchase.
We must be notified first and a Return Authorization number given before merchandise is returned.
Sewing machines, and much, much more!
Gemsy appreciates your business.
More than just a pretty picture.
FREE scheduling, supersized images and templates.
FREE scheduling, supersized images and templates.