PW130 33AMP plasma 130AMP tig & mma pulse foot 110VAC

What is for sale: PW130 33AMP plasma 130AMP tig & mma pulse foot 110VAC

---

Authorized Riland Dealers sell Real Riland Machines with a Real Warranty. Beware of Copies!!!
Bigger Image Below Description.
RilandUSA offers a 1 year Limited Warranty on all Riland Machines Distributed or otherwise sold by an authorized Riland Dealer within the Bounds of the United States of America from the Date of Purchase. Warranty coverage applies for out of country sales as well when the product originated from an authorized dealer or distributor in the United States. Distributors, Resellers, Importers or Wholesalers who obtain machines from any source other than RilandUSA or an authorized dealer will have a void warranty status for any and all repairs through RilandUSA. To confirm any sellers status please call Mon-Fri from 9am to 5pm PST (***) 442-7728 or send an email.
Our Store / Warehouse address is:
Riland PW130 Ultimate 110v All-IN-ONE
* 10-130amp Stick/MMA Welder
w/pulse, high frequency, square wave, slope adjustable
110VAC @ 37amp input - Portable System
HTP, Miller, Hobart, Thermal Dynamics, Blue Point, Lincoln & Hypertherm Don't have anything like it. This machine boasts features found in our other top of the line machines such as a 130amp Tig / MMA Welder with DC Pulse mode with foot pedal, LCD amperage display, 33amp plasma cutter and a generous panel for fine tuning adjustments like Pre-flow, Peak Current, Down-Slope, Pulse Frequency, Base Current and Pulse Width.
This machine boasts 130amps of DC welding in Tig or Stick mode, 33amps of Plasma Cutting power and Tig Pulse mode with a full current controlling foot pedal. Plus it will operate at 110v and we've had great success welding aluminum in pulse mode. This is truly a go anywhere, do anything welding machine with all the best features of the most expensive machines on the market and it's ALL-IN-ONE.
Built in High Speed Cooling Fan w/Thermal & Overload Protection for long life.
Includes: Regulator with Pressure Gauge and Built in water separator with stop cock drain. Also includes fiber reinforced hose for air line, hose nipples and hose clamps. All mounting hardware is included.
All of our Machines are Brand New not refurbished or factory seconds.
Plasma Cutter | Tig Welder | Arc Welder
Power Draw at 33amp cut setting
Duty Cycle: 60% at 33amp cut / 100% at 25amp cut
Cutting Specs: (High Frequency Start = no contact)
3" Per minute @ 5/8" Steel (Severance Cut)
7" Per minute @ 3/8" Thick Steel
17" Per minute @ 1/4" Thick Steel
When I tried the Riland Brand I was blown away by the Performance and Power. It sliced through thick steel like butter, it was also easier to use and felt safer. Plus the electrodes are reversible! I have never seen that before. Sure saves a lot of money in the long run. Using this light weight plasma cutter is cheaper than Oxyacetytlene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and a better, cleaner cut.
Torch head is low profile for tight spaces. 16 foot long torch cord is protected by a heat resistant sleeve.
Why does our plasma cutter boast such thick cutting capacities? Because our machine is designed for Negative potential on the cutting torch and a much higher cutting voltage than miller, hobart, hypertherm or htp. We beat them every time, in every competition!
Plasma Cutter | Tig Welder | Arc Welder
Duty Cycle: 60% at 130amp tig / 100% at 100amp tig
Steel, Stainless, Copper, Moly, Ferrous, Brass, ROD, Aluminum
15-30 Tig / Cutting = 55-75psi 2.4cfm regular dry air.
Weld Thickness (single pass): Steel 3/8", Alum 3/16"
High Frequency Start / DC w/ Pulse Welding
Remote Control = Foot &/or Trigger
1x #4 Shield cup, 1x #5 Shield cup, 1x #6 Shield cup, 3x collets, 1x collet body, 1x long & 1x short back cap for tight spaces.
The torch trigger can be moved for a custom fit. Can be used in finger or thumb positions. Set includes Short back cap to make torch low profile for tight spaces. 16 foot long torch cord is protected by a heat resistant sleeve.
Plasma Cutter | Tig Welder | Arc Welder
Duty Cycle: 60% at 130amp ARC / 100% at 100amp ARC
1x Stick welding rod holder with cable and dinse 25 connector.
A spool gun can be connected to the Tig or ARC welding output of this machine to use it for MIG welding. Simply connect the input to the MIG Spool gun to the ARC output of the PW130 through a 3ohm resistor bridge, connect the trigger wires to the trigger input of the PW130 and you have a 10-130amp Mig Welding Torch. We will have a kit available very soon to allow our Riland 3035 spoolgun to adapt to this machine. We will also offer the option to use a wire feeder with all of our tig machines.
Click the Picture to visit our Listings
Search items for sale by this Seller