Loveshaw cf-40TXL box erector case former

What is for sale: Loveshaw cf-40TXL box erector case former

---

This Little David Case Former was used in a Children's clothing business. We had 5-6 people manually making boxes. This device replaced all of them but one operator. The Case Former allows the use to create a large selection of boxes quickly. We created upwards to 2000 boxes per day that were conveyed to the users pick stations. The actual specs show that the case former will actually run faster than we ran it.
The Case Former was purchased by us 3 years ago and it currently located in our warehouse facility in Cumberland, MD.
Pictures of the Case Former in operation can be seen at the following site:
http://gallery.mac.com/dschwab5/100154
specs as published by Loveshaw
Production Rate: Up to 10 cases per minute, depending on case size and corrugated quality.
Case Dimensions: Length: 7" – 28" (178mm – 610mm) Width: 6" – 22" (152mm – 406mm) Height: 4" – 24" (102mm – 406mm)
Tape Specifications: Width: 1-1/2" (38mm) to 2" (51mm) — 3" (76mm)
Tape Roll Diameter: 15" (381mm) maximum on a 3" (76mm) core Roll Length: up to 2000 yards (1829m) Air Requirements: 13 SCFM @ 80 psi
Power Requirements: 110 VAC, 60Hz, single phase, 10 Amps
Machine Dimensions: Height: 51" (150cm) Length: 125" (325cm) Width: 41" (104cm)