Hioki 3664 optical power meter -fmi

What is for sale: Hioki 3664 optical power meter -fmi

---

"Your One Stop Source for Sales & Calibration of Test & Measurement Equipiment"
* Hioki 3664 Optical Power Meter -FMI*
Highly versatile optical power meter for production lines, R&D and maintenance
Compensation function for the laser light source testing
Fully remote operation via USB interface
Optical power measurement W, dBm
Range setting Auto (Manual setting available)
Accuracy ±0.7% (±5% in combination with the optional sensor)
Wavelength sensitivity compensation Can be set for every 1nm.
Automatic compensation for the sensor’s sensitivity
Max. 10 wavelengths preset (including initial value for a sensor)
Scaling Can be set for each wavelength.
Relative measurement Display the relative value to the measured value or set value.
(Displayed value = Measured value – Reference value)
Reference value can be set from the measured value or manual input.
Settable range: 0.001nW to 1.9999W (-90.00dBm to 33.00dBm)
Display 4-1/2 digit, (19999 max.), Display resolution: 0.01dBm / 0.01dB
Measurement display unit nW, mW, mW, dBm, dB
Wavelength display 4 digit, Unit: nm
Display update rate 330ms approx.
MAX/MIN display Maximum and minimum value display while measurement
Average display Display the moving average value.
Analog output 1V approx. when the sensor calibration point input
Output connector ø3.5 mini jack
Interface Output measurement value and remote control
Auxiliary functions Auto power save, Setting backup, Battery check
Safety EN61010-1: 2001 Pollution degree 2
Power supply AA (LR6) × 4, AC adapter (9445-02
Continuous battery operation 60 hours approx. (continuous use with the 9742 at calibration point input)
Dimensions and weight 85(W) × 160(H) × 35(D) mm, 270g (excluding batteries)
Specifications of Model 9742 OPTICAL SENSOR
Measurable wavelength 320nm to 1100nm
Measurable power -59dBm to +17dBm (at the calibration wavelength)
Max. rated measurable power 50mW (+17dBm) (at all direction irradiation)
Optic receptacle element Si photo-diode
Receptacle dimensions 9.6mm × 9.6mm
Measurement accuracy ±4.3% (±5% in combination with 3664)
[Calibration conditions] Calibration wavelength: 633nm, Calibration power: 100mW, f2mm parallel beam, Perpendicular input to the center of optical sensor, by CW light
Wavelength initial setting 633nm, 635nm, 650nm, 780nm
Dimensions & weight 9742: 18(W) × 180(H) × 20(D) mm, 100g Cable length: 2m
GOODS: ALL our items are FACTORY NEW